My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

01925 790 860

More Views

Victron Argo FET 200-2 Two batteries 200A isolator

Excl. Tax: £95.38 Incl. Tax: £114.46

Quick Overview

Free delivery on this item


200A, 2 battery isolator.
Stock code: 401056
Only 100 left

Availability: In stock

OR

Details

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two batteries from one alternator (or a single output battery charger), without connecting the batteries together.

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

Example:
When a current of 100 A flows through a cable of 50 mm> cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm> cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

Alternator energize input
Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

Argo FET Battery Isolator   Argofet 200-2
Maximum charge current (A) 200
Maximum alternator current (A) 200
Number of batteries 2
Connection M8 bolts
Weight kg (lbs) 1.4 (3.1)

Dimensions h x w x d in mm
(h x w x d in inches)

65 x 120 x 200
(2.6 x 4.7 x 7.9)