My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.


01925 790 860

More Views

Victron BMV 700S Battery Monitor

Excl. Tax: £108.50 Incl. Tax: £130.20

Quick Overview

BMV 700S for single battery bank.

Stock code:  401112

Free delivery on this item

Only 0 left

Availability: Out of stock


The Victron BMV 700s is supplied complete with monitor, round or square bezel fittings, shunt and cable to connect between the shunt and the monitor / display unit.

Precision monitoring

The essential function of a battery monitor is to calculate ampere-hours consumed and the state of charge of a battery. Amp-hours consumed is calculated by integrating the current flowing in or out of the battery. In case of a constant current, this integration is equivalent to current multiplied by time. A discharge current of 10A during 2 hours, for example, amounts to 20Ah consumed. All our battery monitors are based on a powerful microprocessor, programmed with the algorithms needed for precision monitoring.

Standard information and alarms
- Battery voltage (V).
- Battery charge/discharge current (A).
- Amp-hours consumed (Ah).
- State of charge (%).
- Time to go at the current rate of discharge.
- Visual and audible alarm: over- and under voltage, and/or battery discharged.
- Programmable alarm or generator start relay.

BMV 600S: low cost ultra high resolution monitor
- Highest resolution: 10mA (0,01A) with 500A shunt.
- Can be used with 50, 60 or 100mV shunts, current rating from 100A to 1000A
- Lowest current consumption: 4mA @12V and 3mA @ 24V.
- Easiest to wire: the BMV 600S comes with shunt, 10 meter RJ 12 UTP cable and 2 meter battery cable with fuse; no other components needed.
- Easiest to install: separate front bezel for square or round appearance; ring for rear mounting and screws for front mounting.
- Broadest voltage range: 9.5 – 95 VDC without prescaler needed.
- Communication port (Isolated RS232 interface is needed to connect to a computer)