My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.


01925 790 860

More Views

Victron MultiPlus 48V 230V 5000VA Inverter 70A Charger 50 Hz

Excl. Tax: £1,821.75 Incl. Tax: £2,186.10

Quick Overview

• Victron MultiPlus 48V 230V 5000VA Inverterv 70A Charger 50 Hz
• Stock code: 401037

Have you seen it advertised cheaper elsewhere? Call 01925 790 860
Only 100 left

Availability: In stock



Victron MultiPlus 48V 230V 5000VA Inverter 70A Charger 50 Hz

The Victron MultiPlus 5000VA is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.

Unique PowerAssist feature
The Victron MultiPlus 5000VA will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multi's can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.

MultiPlus C 48/5000/70
PowerControl / PowerAssist Yes/Yes
Transfer switch (A) 50
Parallel and 3-phase operation Yes
Input voltage range (V DC) 19 – 33V
Output  Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25 °C (VA) (3) 5000
Cont. output power at 25 °C (W) 4500
Cont. output power at 40 °C (W) 4000
Peak power (W) 10000
Maximum efficiency (%) 95
Zero-load power (W) 25
Zero load power in AES mode (W) 20
Zero load power in Search mode (W) 4
AC Input Input voltage range: 187-265 VAC           Input frequency: 45 – 65 Hz          Power factor: 1 
Charge voltage 'absorption' (V DC) 57.6
Charge voltage 'float' (V DC) 55.2
Storage mode (V DC) 52.8
Charge current house battery (A) (4) 70
Charge current starter battery (A) 4 (12V and 24V models only)
Battery temperature sensor Yes
Auxiliary output (A) (5) Yes (25A)
Programmable relay (6) Yes
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) Yes
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +50 ?C Humidity (non condensing): max. 95
Common Characteristics Material & Colour: aluminium (blue RAL 5012)                   Protection category: IP 21 
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection

Screw terminals 13 mm2 (6 AWG)

Weight (kg) 30
Dimensions (hxwxd in mm) 444x328x240
Safety EN 60335-1, EN 60335-2-29
Emission, Immunity EN55014-1, EN 55014-2, EN 61000-3-3
Automotive Directive  2004/104/EC

1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high

3) Non linear load, crest factor 3:1
4) At 25 ˚C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS
8) Models with 16A transfer switch only (see Quattro for 50A transfer switch)