My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

01925 790 860

More Views

Victron Quattro 24V 230V 8000VA Inverter Charger 50 Hz

Excl. Tax: £2,844.63 Incl. Tax: £3,413.56

Quick Overview




























































Model; 24/8000/200
Maximum feed through current (A) 2x100
Input voltage range (V DC) 19-22V
Maximum efficiency (%) 94
Zero-load power (W) 30
Zero load power in AES mode (W) 25
Zero load power in Search mode (W) 8
Charge voltage 'absorption' (V DC) 28.8
Charge voltage 'float' (V DC) 27.6
Storage mode (V DC) 26.4
Charge current house battery (A)  200
Charge current starter battery (A)  
Weight (kg) 45
Dimensions (hxwxd in mm) 470 x 350 x 280

Stock code: 401019

Have you seen it advertised cheaper elsewhere?  Call us on 01925 790 860

Only 100 left

Availability: In stock

OR

Details

Victron Quattro 24V 230V 8000VA Inverter Charger 50 Hz

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Up to 6 Quattro’s can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Quattro 24/8000/200
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 65Hz Power factor:
Maximum feed through current (A) 2x100
INVERTER
Input voltage range (V DC) 19-22V
Output (1) Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25 °C (VA) (3) 8000
Cont. output power at 25 °C (W) 7000
Cont. output power at 40 °C (W) 6300
Peak power (W) 16000
Maximum efficiency (%) 94
Zero-load power (W) 30
Zero load power in AES mode (W) 25
Zero load power in Search mode (W) 8
CHARGER
Charge voltage 'absorption' (V DC) 28.8
Charge voltage 'float' (V DC) 27.6
Storage mode (V DC) 26.4
Charge current house battery (A) (4) 200
Charge current starter battery (A)  
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 50
Programmable relay (6) 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) 2x
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +50 ?C Humidity (non condensing): max. 95
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 2
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection Bolts M6 
Weight (kg) 45
Dimensions (hxwxd in mm) 470 x 350 x 280
STANDARDS
Safety EN 60335-1, EN 60335-2-2
Emission, Immunity EN55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 ?C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS