My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

01925 790 860

More Views

Victron Quattro 48V 230V 5000VA Inverter Charger 50 Hz

Excl. Tax: £2,254.00 Incl. Tax: £2,704.80

Quick Overview




























































Model 48/5000/70
Maximum feed through current (A) 2x100
Input voltage range (V DC) 38-66V
Maximum efficiency (%) 95
Zero-load power (W) 25
Zero load power in AES mode (W) 120
Zero load power in Search mode (W) 5
Charge voltage 'absorption' (V DC) 57.6
Charge voltage 'float' (V DC) 55.2
Storage mode (V DC) 52.8
Charge current house battery (A) (4) 70
Charge current starter battery (A)  
Weight (kg) 30
Dimensions (hxwxd in mm) 444 x 328 x 240

Stock code: 401018

Have you seen it advertised cheaper elsewhere? Call 01925 790 860

Only 100 left

Availability: In stock

OR

Details

Victron Quattro 48V 230V 5000VA Inverter Charger 50 Hz

The Victron Quattro is a pure sinewave inverter with a built in chargers.  The Quattro can be connected to two different AC sources such as the grid/shore-side power and a generator. The Victron Quattro will automatically connect to the active source.  If both AC sources are down the Victron Quattro will switch to the battery bank.

Quattro 48/5000/70
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 65Hz Power factor:
Maximum feed through current (A) 2x100
INVERTER
Input voltage range (V DC) 38-66V
Output (1) Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25 °C (VA) (3) 5000
Cont. output power at 25 °C (W) 4500
Cont. output power at 40 °C (W) 4000
Peak power (W) 10000
Maximum efficiency (%) 95
Zero-load power (W) 25
Zero load power in AES mode (W) 120
Zero load power in Search mode (W) 5
CHARGER
Charge voltage 'absorption' (V DC) 57.6
Charge voltage 'float' (V DC) 55.2
Storage mode (V DC) 52.8
Charge current house battery (A) (4) 70
Charge current starter battery (A)  
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 50
Programmable relay (6) 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) 2x
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +50 ?C Humidity (non condensing): max. 95
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 2
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection Bolts M6 
Weight (kg) 30
Dimensions (hxwxd in mm) 444 x 328 x 240
STANDARDS
Safety EN 60335-1, EN 60335-2-2
Emission, Immunity EN55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 ?C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS